Welcome to Warmboard, Inc

Radiant heating floor panels

Roth Panel program for Radiant warmingOverview

The Roth Panel program enables installing radiant home heating in a current household along with new construction. It is lightweight, easily put in over solid subfloor or concrete and it is just 3/4" thick for the 3/8" tubing or 1" dense when it comes to 1/2" tubing.


The Roth Radiant Floor Panel program is a quickly put together PEX tubing track system that enables quick installation of hydronic radiant flooring heating over a preexisting subfloor. The system is designed around a 90 psi (6.3 kg/ cm2) high-density polystyrene foam area panel with a bonded 24 ga. aluminum sheet on the top. The foam provides thermal insulation underneath the panel while the aluminum provides also heat circulation concentrated right during the finished floor product. The reduced profile with this item permits effortless retrofit additionally the light-weight makes it easy to utilize in brand new building. The 2' x 4' (61 cm x 122 cm) field panels make installation faster than many other offered services and products. The area panels have tracks that enable the tubing to-be snapped in (no glue is needed) on either 6" (15.25 cm) or 12" (30.5 cm) centers. Radius panels for return bends and double pipe transition panels, to route tubing to your heated location, are included with every box for the Floor Panel program. Additional radius panels can be found separately, if needed. A floor Panel program for 3/8" PEX tubing is 3/4" (1.9 cm) dense and offers an approximate downward insulation worth of R=3.7. The Floor Panel System for 1/2" PEX tubing is 1" (2.5 cm) and provides an approximate downward insulation worth of R=4.5. The full-face aluminum sheet on area panel provides heating qualities comparable to a lightweight tangible overpour, but at lower fluid conditions in accordance with quicker pick-up times


Radiant Panel System plans are offered for 3/8" and 1/2" tubing. Each box comes with these components and certainly will cover 96 sq.ft.:

  • 10 2' x 4' Master Panels
  • 6 Radius Panels
  • 12 Change Panels


Roth has all fixtures and resources readily available that expert installer needs to get the job done.

Heat Transfer Panels-Single Groove

-for installing of radiant heating below the floor

Heat Transfer Panels-Double Groove

Thermo Fin Panels

-two sizes offered (for 1/2" and 3/8" tubing)

-manufactured with 25percent more material than other transfer plates shopping making it possible for lower liquid temperatures therefore greater system efficiencies

-no pre-driller therefore higher installation freedom

Hole Punch Kit

Share this article

Related Posts

Pex Radiant floor heating
Pex Radiant floor heating
Floor Radiant heating
Floor Radiant heating

Latest Posts
Diamond Heating and Air Conditioning
Diamond Heating…
Types of air conditioning…
Refrigeration, Air Conditioning
Schedule of courses Ref…
Heated floor Mats
Heated floor…
Residential Heated snow-melting…
Good Heating and Air Conditioning
Good Heating…
Your HVAC system is one…
Polaris Ranger Air Conditioning
Polaris Ranger…
Polaris, the global leader…
Featured posts
  • Installing Radiant floor heating
  • Pex Radiant floor heating
  • Floor Radiant heating
  • Radiant heating systems
  • Radiant heating
  • Bathroom Underfloor heating
  • Green Air Conditioning and Heating
  • Affordable Heating & Air Conditioning
  • Moore Heating & Air Conditioning
Copyright © 2023 l htownnye.com. All rights reserved.